Wed Aug 01, 2012 1:52 pm by Caseychan
lol no problem.
Just for grins today I took my b200 apart and cleaned it up and oiled it, and reloctited it. The wearing into the cups hasn't actually progressed for awhile, almost like it had to wear down to where the pin would sit completely in the cup. maybe .25mm of wear in the worst spot. I DID notice on the side that the back of the blade touches the spacer, there is almost NO cup wear whatsoever. This leads me to believe that it's just a problem with blade/spacer dimensions. If the spacer had a mill or so removed, they wouldn't come in contact with each other. Having said that, I'm about to be in the market for a metallic handled bali because this g10 is too slippery for one trick and sandpaper on another. Might step it up and find a 42 or something.