Page 1 of 1

Screws and such.

PostPosted: Mon Dec 13, 2010 3:02 pm
by drumkeys
This feels like it's possibly a dumb question but google wasnt being good with answering it. Right now, my primary knife is the Kimura 3 and the screw that holds the safety latch in keeps coming loose. (yes I know loctite) but I actually dont have something thats even more important than loctite, and that is the correct sized driver/wrench, or even where to get one. I actually dont have one for the two top screw either so That info would help as well. Anyways im pretty new and feedback would be appreciated :TU:

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 3:05 pm
by HonorHer

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 3:06 pm
by T-man
You need a set of torx drivers. Lowes or Home Depot, I think even Walmart has them. If nothing there, try your local hardware store or even an automotive store might carry them.

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 3:17 pm
by drumkeys
Thanks, is there a specific size or do they only come in sets? (im going to buy from hardware store)
Im pretty sure the bigger ones are t8's but i really need to know the ones size.

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 3:27 pm
by T-man
I could be wrong but I believe the Kimura's all require T8 and T6 size drivers.

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 3:50 pm
by c.wigum
Either get a set. They are cheap as chips.............. or you could just take your screw into the store and pick the right driver, capiche?

Re: Screws and such.

PostPosted: Mon Dec 13, 2010 10:26 pm
by drumkeys
bought the set
:TU: