here's the specs. let me know if any of these are wrong, especially the bushings.
L= length, T= thickness, W= width
handle liner (303 stainless) 4.8"L x .125"T x .550"W
scales (blue black G10) 4.8"L x .135"T x .550"W
bade (Raw D2, before grinding down) 4.25"L x .125"T x 1.0"W
bushing (oil-impregnated bronze) .1252"L x .1875"T x .25"W
spacer (303 stainless) ?L x .1272"T x ?W
washers (PB) .020"T
the blade will be ground in similar shape to a typhoon with a recurve and a choil with a decent flat grind. the whole knife will be brought up to mirrior finish, with a bit of filework on the handles. the spine of the blade will be crowned. and just for fun, when i'm confident that i did a good job with it, i'll send it up for a passaround. i'll post pictures up as soon as i can get everything drawn up.
any comments and suggestions are welcome.